Product Code: PMSI 01
PMSI 01
Product Description:
The above featured interlock is used to operate the mechanism of Switch Fuse, Isolators, Earth Switches etc. The extended shaft will interfere with lever or the bracket mechanism supplied by the switchgear manufacturer to lock the control switch. This type of Mechanical Interlock is available in 90 deg. clockwise and anti-clockwise key trap position. Also, various sizes and varieties of shaft are available. (Refer drawing for shaft options).
Operation:
1. When the key is trapped in the lock the isolator or earth switch is closed.
2. When the key is turned to pre-determined angular position i.e. PRA-1 or PRA-2, the key is free and the isolator or earth switch is open, thus isolating the power supply.
Installation:
The lock body should be mounted on the door with suitable anti-tampering fasteners to prevent tampering. (Refer drawing for mounting arrangements).
Maintenance:
Proper periodic checks for damages should be done by safety personnel. Do not use oil to lubricate as it may cause further damage and the locks may become non-functional.
In case of any issues in functioning of the locks kindly contact Patlon Technical Team for further assistance.
Technical Data:
| Parameter | Value |
|---|---|
| Material | Brass / SS 316 |
| Mounting | Panel Mounting |
| Weight | Approx. 300 gms |
| Temperature Rating | Min = -40°C, Max = +55°C |
| MTTF Certification | Upon Request |
Applications:
1. Incomer & Bus Bar Interlocking
Ordering Information:
| Number | Attribute | Value |
|---|---|---|
| 1 | Catalogue No | PI 0001 |
| 2 | Drawing No | PI-0001-RO-EX / PI-0001-PT |
| 3 | Key trap position | PRA-1 (clockwise key trap) / PRA-2 (anti-clockwise key trap) |
| 4 | Mounting arrangement | M1 (anti-clockwise) / M2 (clockwise) |
| 5 | Shaft | S1/S2/S3/S4/S5/S6 |
| 6 | Engraving (FT) or Combination Code (PT) | (FT) = max 3 characters / (PT) = max 6 characters |
| 7 | Material | Brass IS 319 / SS 316 |
Accessories:
Flip Cap
EC Declaration:
Patlon Interlocks India Pvt Ltd declares that all the locks and keys detailed herein comply with all the EU Directives & relevant requirement of the low voltage directives 2014/35/EU. These products also conform to applicable Harmonized Standard EN ISO 12100-1, EN ISO 14119, EN 60947-5-1 & IEC 60529.
Don’t tamper, remove or defeat any safety interlock provided for machine safety. Patlon Interlocks India Pvt. Ltd. will not be liable if the same is violated.
Any modifications or alterations to the lock shall exclude any liability on the part of the manufacturer for any damage, which may arise. No modifications, which have an adverse effect on safety, shall be undertakeBefore any modifications on the lock, consult Patlon Interlocks India Pvt. Ltd.
